Kanish Metals, a Dubai, UAE-based company, is a reliable producer and supplier of Aluminium 1070 Bars and Rods that provide high-quality products as per industrial and commercial requirements. Famous for their 99.7% purity of aluminium, these rods and bars provide great corrosion resistance, high thermal and electrical conductivity, and good formability. Aluminium 1070 finds extensive use where high corrosion resistance and electrical properties are more important than strength. Coming in a broad variety of sizes and lengths, Kanish Metals provides precision engineering and rigorous quality control, which makes Aluminium 1070 an assured choice in electrical, marine, and industrial applications.
Aluminium 1070 Bars and Rods consist of approximately 99.7% pure aluminium with slight traces of copper, silicon, and iron. They have a tensile strength of 80–110 MPa, yield strength of 40–60 MPa, and hardness of approximately 25–30 HB. The alloy shows superior corrosion resistance, especially in marine and atmospheric conditions, along with greater thermal and electrical conductivity. Aluminium 1070 can be easily welded and formed because of its purity, although it is comparatively weak compared to other alloys. Its good workability also makes it appropriate for industries in need of lightweight and highly conductive material applications.
| Bar Wire Standard | ASTM B221, B211, B565, B316, AMS 4121 2014 |
| Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Tempers | Tempers range from dead soft annealed to ultra spring temper |
| Rolled Flat Bars Condition | Hardened & tempered, annealed |
| Cold Rolled Bar Technique | Stainless Steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Grade | Fe | Si | Mg | Mn | Cu | Zn | Ti | Al |
| Aluminium 1070 | 0.25 | 0.2 | 0.03 | 0.03 | 0.03 | 0.07 | 0.03 | 99.70 |
| Grade | Density (×1000 kg/m3) | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation (%) | Reduction in Area (%) |
| Aluminium 1070 | 7.7-8.03 | 640 | 495 | 10 | 45 |
| STANDARD | WERKSTOFF NR. | UNS |
| Aluminium 1070 | 3.0275 | A91070 |
Yes, Aluminum 1070 bars are corrosion-resistant due to their high purity, offering good resistance to atmospheric and chemical corrosion. However, they may be less resistant than alloyed aluminum grades.
Aluminum 1070 rods are typically sized by diameter, ranging from small diameters like 6mm to larger sizes of up to 150mm or more, with lengths commonly ranging from 1 to 6 meters.
To maintain Stainless Aluminium 1070 Bar, clean it regularly with mild detergent and water, avoid harsh chemicals, inspect for corrosion or scratches, and ensure proper storage to prevent physical damage.
Aluminium 1070 Bars and Rods are extensively used in the electrical sector for conductors, bus bars, and cables due to their superior conductivity. In the marine and coastal industry, they are employed in the pontoons, hulls of boats, and other sea-based structures that need high corrosion resistance. The alloy is also used in heat exchangers, cooling equipment, and refrigeration plants where its thermal conductivity is instrumental in ensuring efficiency. Its high formability and purity make Aluminium 1070 the choice in the production of kitchen utensils, food containers, and ornamental products. Its corrosion resistance, conductivity, and durability make it universally useful across numerous strategic industries.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Kanish Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Dubai, UAE
Copyright 2024 Kanish Metals. All rights reserved
