Kanish Metals stands out as a reliable manufacturer and supplier of Stainless Steel 410 Flat Bars in Dubai, UAE. They pride themselves on delivering top-notch products that are built for strength, durability, and a decent level of corrosion resistance. Stainless Steel 410 is a martensitic grade known for its impressive hardness and wear resistance, along with its ability to be hardened and tempered. The flat bars crafted from this material offer precision, toughness, and consistent performance in various industrial and engineering applications. Thanks to their advanced manufacturing techniques, rigorous quality control, and prompt delivery, Kanish Metals has earned a reputation as a trustworthy supplier of Stainless Steel 410 Flat Bars in the area.
These flat bars are made up of 11.5–13.5% chromium and have a low carbon content, striking a great balance between mechanical strength, hardness, and corrosion resistance. They boast a tensile strength of around 450 MPa, a yield strength of 205 MPa, and an elongation of 20%. The martensitic structure allows for hardening and tempering, which boosts their wear resistance, durability, and toughness. With their combination of machinability, hardness, and corrosion resistance, Stainless Steel 410 Flat Bars are perfect for tough industrial settings.
Dimensions : ASTM, ASME
Standard : ASTM / ASME SA A582, A276, A564, ASTM A484, 484M
Surface : hrap, hot rolled pickled or sand blasting finished, cold drawn, polished, hairline
Range : Range – 3.17mm to 350mm dia
| Element | C | Cr | Mn | Ni | P | S | Si |
| SS 410 | 0.15 | 11.5-13.5 | 1.00 | 0.75 | 0.040 | 0.030 | 1.00 |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 410 | 1.4006 | S41000 | SUS 410 | 410S21 | – | – | 56A |
Stainless Steel 410 Flat Bars are widely used in applications requiring moderate corrosion resistance and high strength, including automotive parts, cutlery, valves, fasteners, turbine blades, surgical instruments, and industrial equipment due to their martensitic properties.
Standard sizes for SS 410 Flat Bars typically range from 1/4" to 6" in thickness, and 1" to 12" in width, with lengths varying from 10 to 20 feet. Custom dimensions are also available based on specific requirements.
SS 410 Flat Bars can undergo heat treatments such as annealing, hardening, and tempering. Annealing improves ductility, while hardening increases strength and hardness. Tempering after hardening reduces brittleness and enhances toughness, making the material suitable for various applications.
You’ll find Stainless Steel 410 Flat Bars being used across various industries that demand wear resistance, moderate corrosion resistance, and high strength. They’re perfect for applications like pump shafts, valve components, fasteners, cutlery, turbine blades, and automotive parts. Their durability and toughness make them ideal for mechanical tools, industrial machinery, and petrochemical equipment. Plus, they’re utilized in power generation, marine, and general engineering projects where reliable performance is a must. Overall, Stainless Steel 410 Flat Bars offer a cost-effective and trustworthy solution for a wide range of industrial and engineering requirements.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Kanish Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Dubai, UAE
Copyright 2024 Kanish Metals. All rights reserved
