Kanish Metals is a well-respected manufacturer and supplier of **Carbon Steel EN-351 Bars**, located in **Dubai, UAE**. We pride ourselves on providing top-notch alloy steel products that are perfect for precision engineering and various industrial applications. Our EN-351 bars are known for their impressive ability to undergo deep case hardening, resulting in a tough core paired with an incredibly hard surface. At Kanish Metals, we ensure that our EN-351 bars meet international standards for strength, wear resistance, and durability. We cater to industries such as **automotive, heavy machinery, and tooling**, and we’re dedicated to delivering reliable, high-performance steel products throughout the UAE and beyond.
**Carbon Steel EN-351 Bars** are alloy steels that typically contain around **0.12–0.18% carbon**, **0.50–0.90% manganese**, **1.00–1.40% chromium**, along with trace amounts of **nickel, silicon, molybdenum, sulfur, and phosphorus**. These bars boast a **tensile strength ranging from 700–950 MPa** and a **yield strength of about 400–600 MPa**, achieving excellent surface hardness after case hardening. EN-351 offers a remarkable blend of a hard outer layer and a ductile, impact-resistant core. This steel is known for its good wear resistance, moderate toughness, and can be heat treated to enhance performance in challenging mechanical environments.
| Specifications | : | ASTM |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Carbon Steel En Series Angle | : | 5mm to 9mm |
| Carbon Steel En Series Channel | : | 40mm*20mm~300mm*300mm |
| Carbon Steel En Series Beam | : | 3″ thru 12.31″ |
| Carbon Steel En Series Chain | : | 1/8 inch – 1/2 inch Diameter |
| Thickness | : | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
| C | MN | SI | S | P | Cr | Ni | Mo | V | B |
| 0.10-0.20 | 0.60-1.00 | 0.15-0.35 | .035 Max | .035 Max | 0.40-0.80 | 0.60-1.0 | 0.10 Max | – | – |
Max Stress | 370-480 n/mm2 Min | dependent on ruling section |
Yield Stress | 240-400 n/mm2 Min | dependent on ruling section |
0.2% Proof Stress | 225-360 n/mm2 Min | dependent on ruling section |
Elongation | 6-10% Min | dependent on ruling section |
| Internal Standard | BS | DIN | IS | EN | AISI/SAE |
| EN-351 | – | – | – | EN-351 | – |
Carbon Steel EN-351 Bar is commonly used in construction, structural applications, and manufacturing machinery components, providing strength, durability, and resistance to wear, corrosion, and impact for various industrial uses.
The available thicknesses for Carbon Steel EN-351 Bars typically range from 5mm to 250mm, depending on the supplier and specific requirements, with custom thicknesses available upon request.
Carbon Steel EN-351 bar has high strength, good toughness, and moderate corrosion resistance. It exhibits good weldability, hardness, and machinability, with tensile strength ranging from 560 to 700 MPa.
**Carbon Steel EN-351 Bars** find extensive use in applications that demand **high surface hardness and core strength**. You’ll commonly see them in **gears, shafts, spindles, axles, camshafts, and pinions**, particularly within the **automotive and heavy machinery** industries. These bars are perfect for components that experience **continuous motion, high friction, and dynamic loading**, like **drive train parts and machine tools**. In **general engineering**, EN-351 is the go-to choice for **precision components** that need to withstand wear while maintaining impact strength. Its ability to undergo case hardening makes it a versatile material for parts that require a tough exterior.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Kanish Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Dubai, UAE
Copyright 2024 Kanish Metals. All rights reserved
